Siding and Trim Recoated the Right Way
Exterior Painting in Bossier City for peeling trim, chalky siding, and faded storefronts
Exterior painting is mostly preparation: scraping loose paint, repairing soft wood, caulking open joints, and priming bare surfaces before any finish coat goes on. PRC roofing paints residential and commercial properties in Bossier City, from brick ranch homes with painted wood trim to houses with fiber cement or wood siding. You need this work when paint is curling off fascia boards, leaving a white powder on your hand, or peeling around windows.
The process typically starts with washing off dirt and chalking, then scraping and sanding failed paint back to a sound edge. Damaged trim is repaired, gaps at corners and window casings are caulked, and bare wood is primed before finish coats. Because the company also handles roofing and general construction, rotted fascia found during prep can be repaired in the same project.
Request an exterior walk-through so the condition of your siding and trim can be documented before painting is planned.
The Difference Between a Repaint and a Recoat
New paint rolled over a loose coat or soft wood fails along with the layer underneath. A proper repaint deals with the substrate first: failing paint is removed, joints are sealed, and primer is matched to bare wood, previously painted siding, or masonry. On many Bossier City homes, the painted areas are wood trim, soffits, and garage doors set against brick veneer, and that trim takes the most prep.
After the job, fascia and window trim show crisp, solid color instead of flaking edges, and siding no longer leaves chalk on your hand. Caulked joints close the gaps where water got behind the boards, so paint stops lifting at the same spots. PRC roofing & construction covers all exterior work with a three-year labor warranty.
The company holds residential license RL 07966 and commercial license CL 09550, and a seven-person core crew works alongside additional trades when needed. For commercial properties, access around entrances and parking is planned so the business can keep operating. Painting brick is a separate decision, since painted masonry needs upkeep that bare brick does not.
Common Questions About Exterior Painting Work
These questions cover the prep, materials, and checks behind an exterior paint job.
What causes exterior paint to peel at the trim first?
Sills, fascia, and trim joints expose end grain, so paint lifts there first when caulk fails or the wood was not primed.
How is old paint removed before the new coat?
Loose paint is scraped and sanded back to a firm edge, and the surface is washed so primer bonds to clean material.
Why does primer choice matter on exterior surfaces?
Bare wood, painted siding, and masonry each need a compatible primer, and the wrong one can cause the topcoat to blister or flake.
How does the style of a Bossier City home affect the painting scope?
On brick ranch homes the work centers on trim, soffits, and doors, while homes with full wood or fiber cement siding involve the entire wall.
What should you check on the finished exterior?
Look for even coverage with no thin spots, straight lines where trim meets siding, and fresh caulk around windows and doors.
Rot found under failing paint is easier to repair during prep than after it spreads. PRC roofing & construction also performs exterior painting in Shreveport, Monroe, and Ruston. Have PRC roofing & construction look over your siding and trim and outline the prep your property needs.